Follow

Automatic setup of a Hanwha Techwin Camera (Web)

 

This article explains how to setup a Hanwha Techwin IP camera with Sharpvue to enable cloud storage and other features.

Note: Ensure that you have your camera serial number and MAC ready. Or if you choose to install the camera without the SDK; ensure that the camera is port forwarded. If you have access to an Android or iOS device; it may be easier to use the Direct-To-Cloud camera add method available through our app. 

 

Step #1. Start the "Add Camera" Wizard

 

 

First Login to your portal at cloud.sharpvuecam.com. Click on the "TIMELINE" tab. This is where you'll have a list of any cameras you've already setup.

Click on "Add Camera" and pick "Hanwha Techwin". Then name your camera whatever you'd like. 

 

 

Once you click on next, you'll have to add the following information: 

 

A) Your camera's serial number and MAC 

 

 

or

 

B) By toggling "Open SDK" off,  you will need to enter the camera's username, password, IP address, as well as the HTTP and RTSP ports. This means your HTTP and RTSP ports need     to be forwarded on your router.

 

 

Click on Next.

In the Camera Settings menu, choose the Quality you desire, your camera sensitivity and what you would like to have email notifications for. You may also want to enable the "Camera Health Check". Recording Mode options are 30 second "Video" clips or Continuous Recording. Image appearance settings include the ability to adjust your cameras image based on your needs and the camera placement. Settings include "Flip", "Mirror", "Flip-Mirror" and the default "Normal". Once you're done, click on "Finish". 

 

 

That's it for the setup! If you have any questions, contact us at support@sharpvue.com

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments